StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Application of DFQ in Cooling Temperatures - Term Paper Example

Cite this document
Summary
The paper "Application of DFQ in Cooling Temperatures" states that it is imperative to note that the first-order differential equation that will be applied in determining the rate, timing, and quantity of temperature cooling is an ordinary differential equation of first order…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91.6% of users find it useful
Application of DFQ in Cooling Temperatures
Read Text Preview

Extract of sample "Application of DFQ in Cooling Temperatures"

The derivation of the type of equation selected provides a practical relationship in the expected areas of application. Consequently, the primary role of this project presentation is to explore the applicability of the first-order differential equation and its significant contribution to the cooling of temperatures, which is one particular area of interest as far as the subject of real-life situations, is concerned. A first-order differential equation conforms to the linearity of ordinary differential equations since the derivative part of the equation exists in the first degree (Abell & Braselton, 2004). As a result, the general representation of a first-order differential equation of linear type can be represented by the following formula.

Where dy/dx is the derivative part, P and Q are referred to as continuous functions of the variable x. in addition, X and y represent variables that are subject to manipulation. The above-mentioned formulation is the standard form of a first-order linear differential equation, thus, the derivative solutions of such equation, first take into consideration the re-writing of any equation in the standard format before working on it in terms of derivation (Abell & Braselton, 2004). Moreover, if a differential equation contains coefficients preceding the derivative part, it is recommended that the coefficients be divided throughout the equation to ensure uniformity.

U(x) dy/dx+U(x) +P(x) y= d (U(x) y/dx
U(x) y’+U(x) P(x) y=U(x) Y’+yU’(x)
P(x) =U’(x)/Ux integrates both the numerator and the denominator with respect to x.
=Natural log u(x) =integral of P(x) dx+C1
Ux=C*exp (integral Pdx) dx which is the integrating factor.
Note that we do not need the general integrating factor, therefore we assume that C =1. Through the multiplication of the original equation by the integrating factor, we obtain the following
= y’*exp (integral Pdx) dx + yP(x) exp (integral P(x) dx =Q(x)*Ux=exp {(integral(x)} dx
= d/dx[y exp integral P(x) dx =Q(x) exp {integral(x) dx thus the general derivation of this linear first order is
Y*exp {integral(x) dx =integral {exp(x) exp {integral (P(x)} dx
Beneficial features of the first order differential equations
Their derivative part only exists in the first degree. This means that dy/dx cannot exist in a form like d2y/dx2 since the latter is a derivative resulting from a second order differential equation.
When the derivative is preceded by a constant or any other variable they must be divided through the whole equation to obtain the standard form of the ordinary differential equation (Abell & Braselton, 2004).
The first-order ordinary differential equations utilize the integrating factor to obtain their solutions regardless of whether the initial value s are given or not.
The analytic solution of a first-order differential equation
The analytical solution represents the general solution of the equations and it is imperative to note that it contains arbitrary constants, which can only be calculated if there is the presence of initial value problems (Abell & Braselton, 2004).

The numerical solution of a first-order differential equation endeavors to solve a real-life problem and in this case the problem under consideration is the cooling of temperatures using the applications that are derived from these equations. Therefore, in real-life situations, Newton’s law of cooling finds applicability in the heating of substances. It thus states; the rate of change of temperature in a body is directly proportional to the difference in the temperature of the cooling body and the surrounding medium of that body (Abell & Braselton, 2004). For instance, let T represent the temperature of a cooling body
Let Tn represent the temperature of the surrounding medium then the rate of change of the temperature is represented by:
dT/dt .Thus, the association with the law is given by dT/dt=−k (T−Tn)
The negative of K is a constant of cooling, simply because cooling is a process that involves a decrease in temperature (Abell & Braselton, 2004).

Real-life situation
Consider a cooked cake that is measured at 300 degrees F. the cake is removed from an oven and then placed in a room with a temperature of 700F. If after 3 minutes the cake is found to be 2000F, determine the time it will take the cake to cool to a temperature of 1000F (Abell & Braselton, 2004).
Solution
T-Tn =Aexp-kt
A is the difference in temperature.
=200-70=230exp-kt
But time =3 min, therefore, 130=230exp-k (3) take natural logarithms on both sides
We get that k =0.1902
Substitution
100-70=230exp0.1902t
Applying natural logs again, we get the value of time t to be 10.71 minutes. Thus, comparatively the analytic solution cannot solve real-life situation problems as opposed to the latter, which can solve diverse problems as illustrated above. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“DFQ Term Paper Example | Topics and Well Written Essays - 750 words”, n.d.)
Retrieved de https://studentshare.org/mathematics/1694059-dfq
(DFQ Term Paper Example | Topics and Well Written Essays - 750 Words)
https://studentshare.org/mathematics/1694059-dfq.
“DFQ Term Paper Example | Topics and Well Written Essays - 750 Words”, n.d. https://studentshare.org/mathematics/1694059-dfq.
  • Cited: 0 times

CHECK THESE SAMPLES OF Application of DFQ in Cooling Temperatures

Ballast Tank Weld Repair

The paper "Ballast Tank Weld Repair" discusses that salts promoting early blistering of coatings due to osmosis should be removed regularly by means of freshwater washing.... Adequate ventilation and dehumidification measures should be consistently implemented.... ... ... ... Mechanical cleaning to St 3 is acceptable on block joints and damages to the applied coating system....
7 Pages (1750 words) Assignment

Engineering design

The cooking kettle for this case has also been undergoing design advancement.... The aim of the various kettle designers is to achieve as more efficient product as possible.... This project.... ... ... The existing kettle designs use a single power source, limited temperature control as well as low consideration of heat insulation....
9 Pages (2250 words) Assignment

Defining manufacturing sequence of a tool steel

While tool steels are fundamentally medium or high carbon steels, they have varied amounts of specific elements that shape them into specialized application tools, with significant characteristics.... s composition of tool steel varies according to the specific tool application, the aim of his paper is to discuss different types of steel alloys that can be used for manufacture of specific tools....
20 Pages (5000 words) Literature review

Chemical Engineering - Evaporator Mass and Energy Balance, and Mechanical Design

Static mixers that are best suited for specified application can be selected based on the process unit operation that is practised.... This paper 'Chemical Engineering - Evaporator Mass and Energy Balance, and Mechanical Design" focuses on the fact that design is geared towards the improvement of mixer equipment to meet economical system approach and environmental impact assessment requirement....
28 Pages (7000 words) Research Paper

Robust Control of Crane Crab

The purpose of this discussion "Robust Control of Crane Crab" is to provide the reader with a more informed understanding of the main problem of the crane drive control that is to keep almost zero burden deviation in the final crane crab or bridge position.... ... ... ... The main variable parameters are the burden weight mG (detected by a tensometer) and hanging rope length l (measured by an incremental sensor)....
17 Pages (4250 words) Report

Analyzing and Formulizing the Manufacturing Processes for the POOPSTA

"Analyzing and Formulizing the Manufacturing Processes for the POOPSTA" paper aims at selecting the appropriate and suitable materials for POOPSTA or components of this product and Analyzing and formulizing the manufacturing processes for the POOPSTA.... ... ... ... This report answers the entire question abbot the manufacturing of a good quality poopsta (André Shalom, 2007)....
15 Pages (3750 words) Case Study

Heat and the First Law of Thermodynamics

One such application is the heat exchanger which is used to transfer thermal energy between different fluids, between solids and fluids, or between a fluid and solid particulates, at different temperatures and in thermal contact.... "Heat and the First Law of Thermodynamics" paper examines heat and energy transfer first law of thermodynamics and mechanical equivalent of heat, and molar specific heat of gases....
10 Pages (2500 words) Assignment

Role of Fever in Immunity

According to research findings of the paper 'Role of Fever in Immunity', one would blindly think that fever only affects our immune system negatively but this is not the case.... Increased temperature has both advantages as well as a disadvantage to immune functioning.... ... ... ... According to Evans, Repasky & Fisher, (2015), fever is a medical hallmark or symptom of infection and disease....
7 Pages (1750 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us