StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Microbiology of Milk - Research Proposal Example

Cite this document
Summary
From the paper "Microbiology of Milk", it is clear that proper hygienic practices are followed through the complete processing cycle, right from the milking of animals to the final consumption of milk and milk products to ensure a safe product to the consumer…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91.6% of users find it useful
Microbiology of Milk
Read Text Preview

Extract of sample "Microbiology of Milk"

INTRODUCTION Milk has been used since time immemorial, across all cultures, as an integral part of the food pyramid. It has been used right from the raw fluid form to various forms of processed milk like butter, cream and milk desserts, milk powder, cheese etc. Milk is a nutritious medium, right from meeting complete food requirements of an infant in the form of colostrum, to normal milk which is a rich source of sugars esp. lactose, fat and proteins. Milk is a highly perishable commodity and one of the critical factors determining the keeping quality of milk is its microbiological status. In a healthy animal, milk is sterile in the udder, however microbiological contamination may happen depending on the milking methods and the hygiene standards followed during milking and subsequent storage and transport. There are various types of microorganisms that can be found in milk and related products depending on the hygiene standards followed. The microorganisms found in milk and milk related products are classified as unfavorable- ones that are responsible for causing spoilage, and favorable- ones that responsible for bringing about desired changes in the products. There are various established methods available to enumerate the type of the microorganisms present along with their quantification. To ensure that the consumer gets a safe product for consumption various bodies like the FDA and Codex have established the product regulatory standards that all the milk producers and processors are supposed to meet across the product marketing chain. MICROORGANISMS As defined in Wiley’s Encyclopedia, “all living things smaller than 0.1 mm in diameter are classified as microorganisms because they are too small to be seen by the naked eye” (1629). Types of microorganisms These can be normally classified into the following categories: 1. Bacteria – These are single celled microorganisms, normally measured in microns and one of the methods of their classification is based on the fundamental shapes that they exhibit: a. Spherical, b. rod and c. spiral. They reproduce asexually by fission and their growth phase is characterized by distinct phases: a. Lag Phase: This represents the phase where the microorganisms become accustomed to the environment. Under less than optimum conditions, the lag phase gets extended. b. Log Phase: The bacteria starts to multiply at a logarithmic rate. c. Stationary Phase: In this stage, the rate of multiplication slows due to the lack of nutrients and also because of the build-up of toxins. d. Death Phase: In this phase, the growth stops and existing cells start to die off. 2. Yeasts - These belong to the group of microorganisms called fungi. These are classified on the basis of morphology, cultural, sexual and physiological characters. Based on their method of reproduction, there are two forms that are of importance in the food industry. a. Budding and spore forming yeasts: These are also called as true yeasts and reproduce by producing sexual ascospores. b. Budding or Asexual yeasts: These are also called false yeasts. 3. Molds – These also belong to the class of fungi and are multi-celled and filamentous, the filaments being referred to as hypha. These too can reproduce either sexually or asexually. The sexual reproduction normally happens in the unfavorable conditions by forming spores through the process of nuclear fission, whereas the asexual reproduction happens through either fragmentation or spore production in conidia. 4. Viruses – These are intracellular parasites. They need to contact and invade an acceptable host cell to survive and replicate. Factors affecting growth As enumerated by Banwart (102-144), in any food environment, some microbial species will survive and become dominant. Organisms that lack the ability to withstand stresses induced by unfavorable environment will succumb. The conditions that affect the metabolism and multiplication of microorganisms include the following: 1. Nutrients – These are required as source of energy and for synthesis of cellular protoplasm. Microorganisms require a source of carbon and nitrogen, growth factors like vitamins, minerals and water. 2. Moisture – Some microorganisms can remain alive in a dried condition but cannot carry out their normal metabolic activities or multiply without water. They cannot grow in pure water or in absence of water. Water is used to bring nutrients into the cell and to dispel water products. Water is used in chemical reactions that break down substrates to usable molecules. Water activity (aw) is the index of the availability of water for chemical reactions and microbial growth. In general, for growth, bacteria require a higher aw than yeasts, and yeasts require a higher aw than molds. 3. pH: Microorganisms have a minimum, optimum and maximum pH for growth. Microorganisms can grow in a wide pH range. The variations in the pH values for growth may be due to different strains of a species or different species in a genus, the type of substrate, the acid or base used to adjust pH or other factors. 4. Oxidation-reduction (OR) potential: In microbial cultures, the simultaneous oxidations and reductions are the sources of energy for cell processes. Since energy is needed by the cell to function normally, OR reactions and OR potentials are important. Strictly aerobic organisms grow only in the presence of free atmospheric oxygen. Strictly anaerobic organisms survive only in the absence of free oxygen. Facultative anaerobes can grow with or without free oxygen. 5. Inhibitory substances: Generally, inhibitors affect microorganisms by acting on the whole cell, cell wall or sell membranes, by interfering with the genetic mechanism of the cell or by binding to the essential nutrients. Some examples of are lysozymes, Avidin, enzyme inhibitors etc. 6. Temperature: It is one of the most important environmental factors that regulate the growth of microorganisms. Temperature is related to the ability of an organism to grow and survive. It also has an effect on the cell size, metabolic products such as pigments and toxins, nutritional requirements, enzymatic reactions and chemical composition of cells. Each organism has a minimum, optimum and maximum temperature for growth, based on which they can be classified as psychrophiles (which can grow at low temperatures, the optimum temperature being 15C), mesophiles (which have an optimum growth temperature of 25C to 45C) and thermophiles (which have an optimum growth temperature of 45C or higher). Enumeration methods An estimate of the number of microorganisms in or on foods is needed in order to determine if a product meets the microbial levels expressed in specifications, guidelines, or standards. Microbial count can be used to help predict the shelf life of certain foods. To a limited extent, the microbial numbers might be used to evaluate the potential safety of foods. Hence the enumeration methods serve as a critical tool for quality assurance. (Banwart 11-12). The samples need to be collected aseptically and diluted to required concentrations. The dilution needed depends on the contamination level of the food. The various tests that are of relevance in food industry are given below, and the method used depends on the purpose of testing: 1. Total Cell Count: One of the quickest ways of determining the microbial load in a system. However, this method does not differentiate between the dead cells and the living cells. It is of use when online adjustments are required in a processing operation to rectify a problem. Direct microscopic counts, coulter counters etc. are the methods used. 2. Total Viable Count: There are many methods, most of which are based on plate count or tube dilution methods. Pour plate count, most probable number (MPN), Tube dilution etc are the methods employed. 3. Estimations based on metabolism: This method uses electrical impedence, acid production and dye reduction tests like resazurin or methylene blue. 4. Measurement of cellular constituents: This is one of the accurate and sensitive methods to estimate the viable bacterial count. For example, luciferase test is used to measure ATP and hence the bacterial count. Control methods Just as important the enumeration methods are to ensure the quality of the milk and milk products, control methods also play a crucial role in assuring a safe product to the consumer. The method of control used depends on the type of the microorganism, their initial count and the type of the milk product in question. Generally, the following methods are used either singly or in combination to control the microbiological spoilage of the food products: 1. Drying: It is a commonly used method that reduces the water activity of the food and hence the microorganisms cannot grow. Generally sun drying or controlled dehydration at high temperatures is used and is deployed especially for meat products and fruits & vegetables. 2. High temperature preservation: In this method, the product is exposed at high temperature, thereby resulting in heat coagulation of proteins and enzymes and killing the microorganisms. However, thermodurics can survive these high temperatures. 3. Low temperature preservation: Low temperatures reduce the enzyme activity of the microorganisms, though the microbes may survive for a long time. Psychrotrophs can survive these low temperatures and can ultimately spoil the food stored in cold conditions. 4. Radiation treatment: The ionizing radiations like the X-rays and gamma rays break down the DNA structure or may lead to formation of free radicals by ionization of water, thereby breaking the chemical bonds in the microorganisms. Since there is no rise in the temperature of the food, it is also referred to as ‘cold sterilization’. The non-ionizing radiations like the UV rays are used for surface treatment. 5. Use of chemicals: Chemicals used may be bacteriostatic (which prevent the growth of the microorganisms) or bactericidal (which kill the microorganisms). The FDA regulates the use of these chemicals. Nowadays, antibiotics like nisin are also used. 6. Use of osmotic pressure: The application of osmotic pressure leads to ‘plasmolysis’ and ‘plasmoptysis’, which results in the death of the microorganisms. Pickling is a commonly used preservation technique for vegetables. 7. Change in pH: Since the microorganisms have an optimum pH for growth, any changes form the optimum pH will result in arresting the growth of the microorganisms. 8. Use of Ultrasound: Non-thermal technologies like ultrasound (waves with a frequency greater than 20KHz) have proven to have bactericidal effects, especially when combined with other methods like mild heating (D’Amico et al 556). MICROBIOLOGY OF MILK AND MILK PRODUCTS Depending on the health status of the animal to the hygiene standards followed during milking to storage, transport and processing, various types of microorganisms can be found in milk and related products. Significance of microorganisms in foods depends upon several conditions: (1) the numbers found; (2) the types of microorganisms; (3) the type of food; (4) the treatments to which the food has been exposed; (5) the processing or storage treatments the food will receive; (6) whether the food is to be eaten as is or heated; and (7) the individuals who might consume the food. Microorganisms may have at least one of the four functions in a food. They may have a useful function, cause spoilage, be a health hazard, or be inert (Banwart 49). Microbiology of Raw Milk Cow’s milk consists of about 87% water and 13% total solids. The freshly drawn milk is slightly acidic, with the pH ranging from about 6.3 to 7.2. The first milk drawn has the highest microbial count, the middle milk has a smaller count and the microbial count of the strippings is the least. It is a general practice to discard the first portions of milk. The temperature of freshly drawn milk is about 38ºC, which is very conducive for microbial growth. If the milk is not cooled rapidly to about 16ºC, it will spoil very fast. The unsterilised milk ferments rapidly, resulting in formation of lactic acid due to hydrolysis of lactose by Streptococcus lactis. In the second stage, the hexoses are fermented to lactic acid. There are various strains of S. lactis which have been identified and which result in differences in the flavor produced, rate of acid formation etc. Some of the varieties identified are S. lactis var. maltigenes, S. lactis var. tardus and S. lactis var. anoxyphilus. As the acid concentration increases, it eventually causes the precipitation of casein at a pH of about 4.6 to 4.7 and finally results in prevention of growth of the bacteria causing fermentation. After this, molds and yeasts start growing in the soured milk. They utilize some of the acid and produce a corresponding decrease in the acidity. Subsequently the putrefactive bacteria take over. There are many tests that are done to assess the microbial quality of the fresh milk. These are: 1) the direct microscopic count, which determines the total viable and dead microorganisms in the sample; and 2) the agar plate method, which measures the number of viable microorganisms in the milk. Practically, the raw milk is stored at a low temperature of less than 16ºC to reduce the rate of the bacterial growth. Also, it is critical that the milking is done under hygienic conditions and also that the milking equipments are sanitized before milking since the shelf life of raw milk is proportional to the initial bacterial load. This will help the milk keep well till it is transported for subsequent processing. Microbiology of Pasteurized Milk The initial microbial load of raw milk depends on the conditions of milking and also the storage temperatures. In the milk processing plants, the milk is rapidly cooled to less than 4.4ºC to maintain quality. It is then pasteurized as whole milk, skimmed milk or low fat milk. Pasteurization is a process used to kill yeasts, molds, and pathogenic and most other bacteria and to inactivate certain enzymes without greatly altering the flavor. Milk is heated to at least 62.8ºC and held for at least 30 minutes. Alternatively, it can be heated to at least 71.7ºC and held for at least 15 seconds. Putrefactive microorganisms can survive pasteurization. Hence the pasteurized milk, which has a shelf life of 2 to 3 days will putrefy rather than develop acidity. The shelf life of the pasteurized milk depends on the microbiological quality of raw milk and the efficacy of pasteurization. Phosphatase test is done to check the efficacy of pasteurization. Phosphatase is an enzyme present in the raw milk and its thermal resistance is greater than that of the pathogens. A positive test indicates either underpasteurization or contamination with raw milk. Among the latest developments, microfilteration along with pasteurization has shown a reduction in the microbial count and increase in the shelf life. Raw skim milk was microfiltered at 50ºC through 1.4-micron membrane and subsequently pasteurized and cooled to 6ºC. In comparison to raw skimmed milk that had a bacterial count of 2400, 3600 and 1475 cfu/ml across three trials, microfilteration reduced the bacterial count to 0.240 0.918 and 0.240 cfu/ml whereas pasteurized microfiltered skim milk had a count of 0.005, 0.008 and 0.005 cfu/ml, demonstrating an average 5.6 log reduction due to combination of microfilteration and pasteurization (Elwell and Barbano E20). Some of the common microorganisms seen in milk are given in the table below: Microorganism Source Effect E. coli Wash water O157:H7 is a pathogen Alcaligenes viscous Wash water Ropy or Slimy milk Clostridium perfringens Manure, soil ‘Stormy’ fermentation of milk Streptococcus lactis Manure Souring Microbiology of Butter Butter is prepared normally by souring the cream and then churning it to separate fat. Butter is composed of milk fat, water, casein, lactose and salt. Butter cultures consist of: 1. Microorganisms producing high acidity like Streptococcus lactis and Streptococcus cremori; and 2. Microorganisms that impart the flavor and aroma like Leuconostoc dextranicum and Leuconostoc citrovorum. The sources of contamination in butter are the equipments used, the quality of wash water, air contamination, factory personnel and the packaging materials used. External contamination of butter can lead to problems like (Salle 567-568): 1. Rancidity: The rancid odor is due to the hydrolysis of glycerides to glycerol and fatty acids like butyric and caproic acid. The microorganisms responsible include the species of Pseudomonas, Micrococcus, Penicillium, Cladosporium and Serratia. 2. Fishiness: This results from high acidity and also due to decomposition of lecithin that results in the formation of trimethylamine. It is caused by the microorganism Proteus ichthyosmius. 3. Off flavors: Off flavor is produced by the growth of foreign microorganisms. Some of these defects are malty flavor caused by Streptococcus lactis var. maltigenes, yeasty flavor caused by Torula cremoris and Torula sphaerica, cheesy flavor caused by Lactobacilli and other organisms and metallic flavor caused by various organisms including a strain of S. lactis. Due to the presence of salt in butter, it becomes an unfavorable medium for microbial growth. However, it is critical that external contamination is avoided to ensure that the keeping quality of butter does not deteriorate. Microbiological analysis of butter usually includes the following tests: total bacterial count, yeasts and molds, coliform estimation and estimation of lipolytic bacteria. Microbiology of Cheese Cheese making is based on the coagulation of casein from milk by acidification, which is achieved by addition of lactic acid producing bacteria. There are many processes used in cheese making and hence there are various types of cheese available in the markets. The first phase of cheese preparation is fermentation of lactose by using lactic acid bacteria that results in the formation of an acid curd. Subsequent processing depends on the type of cheese required. Cheese is broadly classified into the following two categories: 1. Hard Cheese: This is prepared by subjecting curd to a high pressure so as to remove the whey as much as possible. This gives a product that does not soften during the ripening process. Examples of hard cheese are Cheddar cheese, Swiss cheese etc. 2. Soft Cheese: This is prepared by allowing the whey to drain from the curd without any external pressure. Hence these tend to have more moisture that the hard cheese. Examples of soft cheese are Roquefort cheese, Camembert cheese etc. Many microorganisms are responsible for the characteristic aroma and flavor of different types of cheese. Some of the desirable microorganisms isolated from cheese are Lactobcillus bulgaricus and L. helveticus, commonly used as a starter to make cheese, Streptococcus lactis, S. cremoris, S. thermophilus, Leuconostoc citrovorum, L. dextranicum, L. casei, L plantarum and Propionibacterium shermanii among others. The common problems seen in cheese as reported by Salle (1954) are ‘Swollen Cheese’, which is a result of lactose fermentation that results in formation of gas along with lactic acid and the gas causes the cheese to swell and it may eventually burst. The causative organism for this problem generally is Aerobacter.The other common problem is the surface discoloration that is caused by molds like Penicillium casei, Cladosporium herbarum and Monilia niger, Lactobacillus brevis var. rudensis causes the appearance of rusty spots in cheddar cheese. The sources of contamination in Cheese could be the quality of raw milk used, less ripening period, equipments used, environment and the personnel. The routine cheese microbiological analysis includes enumeration of yeasts and molds, total coliforms and Staphylococci, which is done during manufacturing process and also after curing. Microbiology of Fermented Milk Products The consumption of soured milk preparations is widespread as it is associated with having therapeutic values. These are known by different names in different parts of the world. Normally Streptococcus, Lactobacilli and Saccharomyces species are used in starter cultures. The products like yoghurt, curd, kefir etc. come into this category. Nowadays, this category is gaining prominence as many functional foods are being designed using specialized cultures to deliver a specific health benefit. REGULATION AND STANDARDS At a national level in the US, US Department of Agriculture has issued the quality standards for various dairy products and can be accessed at www.ams.usda.gov/standards/standair.htm. Also, US FDA also defines the products, their standards and the labeling requirements that can be accessed at www.fda.gov. At an international level, Codex Alimentarius is used as a reference for the standards of milk and milk products, which can be accessed at www.codexalimentarius.net. CONCLUSION Microorganisms are ubiquitous and are either desirable or may be pathogenic. Milk and milk products are a good medium for microorganisms to grow. Hence it is very important that proper hygienic practices are followed through the complete processing cycle, right from milking of animals to the final consumption of milk and milk products to ensure a safe product to the consumer. Use of proper enumeration techniques is a critical part of the quality control process. It is the responsibility of the producers and processors to provide a safe product to the consumer and the national governments should ensure that local environmental conditions are taken into consideration while framing the regulatory standards for milk and milk products. Though in the past a lot of emphasis was given to protect the consumers from the pathogens and undesirable microorganisms, of late there has been a concerted effort to utilize the desirable microorganisms and design food products for specific health benefits. In a study on cancer patients, Henriksson (81) reported that intake of fermented milk products could be of value in decreasing chronic bowel discomfort following radiotherapy of pelvic malignancies. Being an excellent growth medium for microorganisms, milk can be transformed into fermented milk products supplying humans with living healthful probiotic bacteria, recognized to influence human health by preventing specific health problems and combating some illnesses like diarrhea. Using targeted dairy cultures, antihypertensive fermented dairy products can be obtained, delivering increased ACE-inhibitory effects. Milk and technologically modified dairy foods are meeting growing consumer demands for pure products without unnatural additives, thus providing the same benefits as other artificially fortified functional foods (Gallman). For example, Danone’s Lactobacillus casei imunitass strain is particularly effective in reducing diarrhea in kids. There are designer yoghurts that have probiotic strains, which have been shown to destroy H. pylori, the organism responsible for peptic ulcers. Promising ongoing research is being conducted on the use of probiotics for the treatment of Clostridium difficile colitis, treatment of irritable bowel syndrome, treatment of intestinal inflammation in cystic fibrosis patients etc. WORKS CITED Banwart, G.J. Basic Food Microbiology. New York: Van Nostrand Reinhold, 1989. D’Amico D.J., et al. “Inactivation of microorganisms in milk and apple cider treated with ultrasound.” Journal of Food Protection, 69.3 (2006): 556-563. Elwell, M.W. and Barbano, D.M. “Use of Microfilteration to Improve Fluid Milk Quality.” Journal of Dairy Science, 89 (2006): Suppl 1: E20-30. Francis, F.J. “Milk and Milk Products.” Wiley Encyclopedia of Food Science and Technology. 2nd ed. 2000. Gallman, P.U. “Milk as a source of Nutraceuticals and Dairy based Functional Foods.” Internet. Available: http://ift.confex.com/ift/2002/techprogram/paper_10336.htm. 24 Apr 2006. Henriksson, R., et al. “Effects if active Addition of Bacterial Cultures in Fermented Milk to Patients with Chronic Bowl Discomfort Following Irradiation.” Supportive Care in Cancer, 3 (1995): 81-83. Salle, A.J. Fundamental Principles of Bacteriology. New York: McGraw-Hill Book Company Inc., 1973. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Microbiology of Milk Research Proposal Example | Topics and Well Written Essays - 3500 words, n.d.)
Microbiology of Milk Research Proposal Example | Topics and Well Written Essays - 3500 words. https://studentshare.org/chemistry/1703944-microbiology-of-milk
(Microbiology of Milk Research Proposal Example | Topics and Well Written Essays - 3500 Words)
Microbiology of Milk Research Proposal Example | Topics and Well Written Essays - 3500 Words. https://studentshare.org/chemistry/1703944-microbiology-of-milk.
“Microbiology of Milk Research Proposal Example | Topics and Well Written Essays - 3500 Words”. https://studentshare.org/chemistry/1703944-microbiology-of-milk.
  • Cited: 1 times

CHECK THESE SAMPLES OF Microbiology of Milk

Using antibiotics on dairy herds. Im going in favor of this process

A study by Church et al, (4220) concerning the treatment of intra mammary infections that were infected by minor pathogens such as Corynebacteruium boris portrayed that that though dry milk periods aided in milk production, there were no considerable effects on milk production related to udder health in short dry period and long dry period, treatment of the intramammary infections could only be treated using antibiotics.... Such organisms are passed to humans though fecal matter, ground beef, raw milk, lettuce spinach and other related plants that cow dung may be used as a fertilizer....
4 Pages (1000 words) Research Paper

Describing concepts of Microbilogy

Examples are milk pastuerization and boiling of drinking water.... microbiology involves the study of microscopic organisms-bacteria, viruses, fungi and protozoan as both disease causative agents and for beneficial purposes.... Branches of microbiology include environmental, medical, industrial, agricultural, water and food microbiology.... Garments are Concepts of microbiology Affiliation: microbiology involves the study of microscopic organisms-bacteria, viruses, fungi and protozoan as both disease causative agents and for beneficial purposes....
2 Pages (500 words) Essay

Helicobacter pylori (Microbiology CS3)

Bland foods along with milk are recommended and it is advised that small amounts of food should be consumed with every meal.... It is believed to be transmitted via the oral route by the ingestion of food and water contaminated with fecal Helicobacter pylori (microbiology CS3) Schools Number and of (e.... May 18, 2012)Helicobacter pylori (microbiology CS3)Introduction Helicobacter pylori, a gram-negative, spiral shaped, flagellated, microaerophilic bacterium is found in the lining of the stomach and the duodenum (Mobley, Mendz and Hazell, 2001; Helicobacter Foundation, 2006)....
2 Pages (500 words) Case Study

Physical and Chemical Requirements for Microbial Growth

The main ingredient in the industrial production of yoghurt is milk, with the type of milk used dependent on the type of yoghurt intended.... Yoghurt is a milk product (produced from bacterial fermentation) with at least 8.... For microbes to grow there are certain physical and chemical requirements that should essentially be in place....
4 Pages (1000 words) Essay

Role of Microbes in Our Ecosystems

According to Toy (2008), these roles include, among others, protection against infection such as by providing a healthy counter-active microbial flora, aiding decomposition and soil enrichment, processing of foods and beverages such as of fermented milk, wine, alcohol, yoghurt, sauerkraut, and so on, aids in agricultural production through nitrogen fixation, for example, are useful inn study and manipulation of the DNA of plants and animals (genetic engineering/ biotechnology), and in the development of vaccines....
2 Pages (500 words) Essay

Food Safety Measures for Milk

It provides solid insight into the area of milk processing.... It is argued that although the authors' paper provides solid insight into the area of milk processing, these methods are not tested effectively scientifically.... There are many different aspects of the production chain of milk and dairy products that have the potential to lead to the contamination of the product by microorganisms(Te Giffel, Beumer, & Bonestroo, 1996).... It is estimated that between one and five percent of all bacterial outbreaks are the result of bacterial contamination of milk or milk products(Buyser et al....
12 Pages (3000 words) Assignment

The Technologies Used for the Heat Treatments of Milk

This increase the shelve life of milk.... Heating, if done inappropriately can cause changes in the constituents of milk, like affecting the solubility and the nutritional value of the milk (Morales 2000).... However, there are technologies developed to obtain pasteurized and UHT milk using different temperature profiles and the effect of the quality of milk may vary depending on the process involved and temperatures applied (Birlouez – Aragon et al 2002)....
11 Pages (2750 words) Essay

What Is the Impact of Bluetongue Virus on Domesticated Animals and How Is This Important

These animals can also lose weight and reduce milk production if affected by the virus (Steinfeld & Mooney, 2010).... Bluetongue virus does not only affect the unborn calf but also affects the cow's milk production.... Apart from the cow becoming ill during the viral infection, its milk production can drop significantly....
6 Pages (1500 words) Literature review
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us