StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Geotechnical Properties & Construction Methods - Coursework Example

Cite this document
Summary
QUESTION 1 Before starting any building or civil engineering work, a ground investigation is very important. It allows for a better understanding of the type and quality of soil, bearing in mind that both parts of the structure, superstructure and substructure, are supported by the soil beneath…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER96% of users find it useful
Geotechnical Properties & Construction Methods
Read Text Preview

Extract of sample "Geotechnical Properties & Construction Methods"

Download file to see previous pages

At this stage, Engineer will be collecting data from Geological survey, topographic maps, photogeology (aerial) , digital data, borehole records, national survey, mining records in order to understand the geology, compressive soils, drift thickness, landslides, soluble rocks, made ground, etc.… The main importance of the desk study is to understand the geological condition of the site in order to analyse its implication during any stage of the planned engineering activity. This means that for a difficult ground condition, either the foundation design has to be adequate or a reduction of the actual superstructure loads has to be considered.

In the given site, the points below can be listed as evidence of desk study as an element of site investigation: Borehole data: the presence of made ground and building debris with patches of old oil spillages; this has been found at a thickness of 1m above the ground level. Soft silt up to a depth of 10m then compacted sand and gravel at 18m. This is the exact composition of the soil beneath and will allow for adequate selection of foundation design. Knowing that up to a depth of1m below the ground level, the soil has almost no strength.

This layer will have no importance in the overall bearing capacity of the soil. The Borehole data will enable Engineers to be aware of possible soil contamination of the top soil, weak soil up to a depth of 10m and that strong strata can be seen only after 18m below the ground level. One can argue that Strip foundation; defined as shallow foundation (Maheshwari, 2009) will never be ideal for this type of soil. Topographic map. For the considered site, a topographic map has been obtained. This gives the large-scale detail as well as the relief of the site.

It consists of measuring the ground level with respect to a benchmark (Mellow, 2010). On map has shown latitude, which is the level of a given point on site with respect to the ground level. For the fact that two points of the same site are not always at the same level with respect to the sea level, while a building requires a level terrain, topographic map will be important to give the ground profile, and enable engineers to quantity earthwork; this is the volume of cutting and filling in order to level the site before construction begins.

Ground water table: as an element of the site investigation, the desk study will give enable to locate the ground water. For the proposed site, this is 1.5m below the ground level. McLean and Rible (1985) explained that the water table is a very important factor influencing the overall strength of the soil. In an undrained condition, where the water pressure has been taken into account, the total strength of the soil is much higher than the drained condition, without water; keeping in mind that the latter will give the actual strength parameters of the soil.

Overestimating the strength of the soil can lead to structural failure as the foundation will not be under-designed therefore will not be able to support the imposed load from the superstructure. Also, as the required construction has taken into account a basement, deep excavation will be required. Knowing the ground water level, will be very important for the fact that, if it is above the required depth of excavation, flooding will occur and the exaction, representing the working environment will be against the health and safety.

It can be seen that the desk study wi

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Geotechnical Properties & Construction Methods Coursework”, n.d.)
Geotechnical Properties & Construction Methods Coursework. Retrieved from https://studentshare.org/engineering-and-construction/1482052-geotechnical-properties-construction-methods
(Geotechnical Properties & Construction Methods Coursework)
Geotechnical Properties & Construction Methods Coursework. https://studentshare.org/engineering-and-construction/1482052-geotechnical-properties-construction-methods.
“Geotechnical Properties & Construction Methods Coursework”, n.d. https://studentshare.org/engineering-and-construction/1482052-geotechnical-properties-construction-methods.
  • Cited: 0 times

CHECK THESE SAMPLES OF Geotechnical Properties & Construction Methods

Strategic Analysis: Contamination and Remediation of Brownfields Sites

It also monitors site conditions, earthwork, and foundation construction.... Founded in 1985, Geotechnical Engineering involves the investigation of existing subsurface conditions and materials to determine its physical, mechanical chemical properties for assessing risks posed by site conditions.... Table 1 lists all the geotechnical tests conducted to determine the various physical properties of soil....
10 Pages (2500 words) Essay

Geotechnical Investigations in the UK and Saudi Arabia

Geotechnical investigations are mandatory at every construction site.... If aberrant results of improper soil testing are used as a basis for the construction then a high level of hazard is posed on the construction.... These geotechnical tests should be carried out at the beginning of any construction and these are regarded as the basic step for feasibility studies.... This research will help to understand various geotechnical investigations done before construction and their importance....
40 Pages (10000 words) Coursework

Shear Testing in Made Ground

The student will carry out a laboratory testing and review the results. This assignment… Further to this the methods of improving the ground for construction loading must be addressed. The invention of modern technology has made it possible for otechnicians and construction firms to determine the usability of Made Ground through the estimation of its strength and necessary properties (Bouazza et al.... Such a test is helpful in determining the usability of the ground and outlining the soil's harmful contents that may make construction works on the ground impossible....
12 Pages (3000 words) Essay

Geotechnical in Civil Engineering

Geotechnical engineering uses the geophysical methods in measuring the physical properties on the earth sub surface.... These methods have the potential of measuring the anomalies in the properties of soil to identify the position and the presence of minerals (Das and Sobhan, 2013).... They involve applying physical methods in measuring the physical traits of rocks and soil thus detecting the physical differences between the rocks that have the hydrocarbons or ore deposits....
2 Pages (500 words) Essay

Building Construction Site Constraints

"Building construction Site Constraints" paper argues that the study of the behavior of rocks and soil is extremely important before designing the foundations of a building.... Geotechnical engineering not only involves designing the foundations for the buildings but also it is involved in designing the earth support structures which play a supporting role in the construction of roads, dams, and tunnels.... A proper investigation method should be used in order to determine the physical and chemical properties of rocks in the area....
6 Pages (1500 words) Coursework

Soil and Concrete Test

Soil and concrete tests are necessary for evaluating the sustainability and feasibility of the construction.... nbsp; The construction will also entail the use of untested site batched concrete for the foundation pads.... Although most contractors often neglect the soil, it is the most important element for all construction projects.... The nature of the soil is usually the basis of the construction of virtually all structures, bridges, dams, and buildings (Wesley 2010, p....
10 Pages (2500 words) Report

Impact of Geotechnical Engineering on Tunnel Construction

It became clear that the soil could be controlled by the use of scientific methods to support quite a number of structure in different places by control of the soil behaviour of those areas.... This work called "Impact of Geotechnical Engineering on Tunnel construction" describes geotechnical engineering as a branch of civil engineering.... oncisely, the main function of Geotechnical engineer in contemporary construction is fundamental in avoidance of disasters that might arise from earthworks or construction related to surface behaviour....
8 Pages (2000 words) Essay

The Concepts and Objectives of Fire Safety in Buildings

It looks at common structural materials and their properties, the aspects of building constructions such as foundation design, basement and retaining walls, ground floors, and above ground construction methods.... hellip; The paper has looked at various concepts related to structural design, including the principles of structural engineering and related calculations such as second-moment area, beams, cantilevers, truss and frames, force diagrams, bending moments, and shear force calculations as well as design methods like permissible stress design, and limit state design....
24 Pages (6000 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us