Essays on Risk Management and Feasibility Analysis of the Aircraft Design Research Paper

Download full paperFile format: .doc, available for editing

The paper "Risk Management and Feasibility Analysis of the Aircraft Design" is a good example of a management research paper.   The entire project centers on the creation of a passenger aircraft that will uphold the green environmental sustainability concept. In the design of the plane, various factors are being taken into consideration. These factors include; the aircraft has a substantial amount of fuel-saving on the passenger's nautical mile flown, it can easily navigate to the airports both regional and international presence in Australia, and finally, it can easily fly to any region in the world without making unnecessary stops. BACKGROUND The entire world is going global.

Therefore, this has prompted the need for the aviation industry to comply with the strict environmental regulations that set on pollution. Indeed, the estimated pollution rate of aircraft by 2030 would be 43 gigatonnes of contamination. (Ramesh, 2012). Certainly, this is a great margin and has promoted the incorporation of technology in the design of aircraft that are environmentally friendly. The aircraft design that has proposed in the project utilizes the existing technology to not only fuel the plane but also ensure that GHC reduces emissions per nautical mile.

Also, the aircraft will be using biofuel to propel tithe technology has been tested and tried in some aircraft like Continental Airlines and has proved successful. The aeroplanes using biofuel technology contribute immensely to the reduction in pollution and the cost incurred in fuelling the aircraft( Sadraey, 2012). The biofuel technology that the aircraft will use will utilize the algae and jatropha components as fuel. Indeed, these components play an integral role in propelling the aircraft and also reducing pollution.

Also, the two have been used before in research and found suitable for use in biodiesel vehicles(Marsh, 2015,p. 190). In addition to this aspect, the oil prices in the world have been escalating tremendously; this has resulted in the companies within the aviation industry looking for ways of survival. The design of the aircraft that take into consideration the exploration of alternative fuels has been viewed as one way of remedying the industry. Apart from seeking alternative fuels the increment in the speed has to be taken into consideration. This aspect relates to the nautical miles flown by the passengers.

However, the engines should be capable of combusting the fuel selected to used at a faster rate resulting in the increment of speed. Additionally, this aspect will be very crucial for both the passenger and their aeroplane. Therefore, the reason for the statement is that there will be an increase in the number of trips that the aircraft can take in a day increasing the revenue for the company. On the other hand, the passengers stand to gain on arriving at their place of destination on time (Graham, Hall, and Morales, 2014,p. 38). Additionally, the aspect of noise pollution has often been a notion within the aviation industry.

The scientist has stepped in and is trying to devise measures that will ensure that the pilot can easily fly the aeroplane with minimal noise. The noises often generated by the aircraft arise from the spoilers. They play an integral role in the landing and when the aeroplane is taking off. The noise generated is as a result of the fluctuations on the position of the aircraft. The noises are more pronounced in the smaller passenger aeroplanes (Graham, Hall, and Morales, 2014,p. 38).

Because of the technology the design has applied this aspect of the fractal grid spoilers. The spoilers tend to deflect the impact that occurs when the aircraft is landing hence reducing the noise generated from the aeroplane.

REFERENCES

Anon, (2016). MIT DESIGNS GREENER PLANE FOR NASA. [online] Available at: http://speednews.com/article/7466 [Accessed 13 Jun. 2016].

Birchette, T.S., The Boeing Company, 2014. Ultra-low friction air pump for creating oscillatory or pulsed jets. U.S. Patent 8,714,945.

Evans, C.R., Ward, D.D., Lin, W.W., Chao, H.S. and Begovich Jr, J.T., General Electric Company, 2001. Elastomeric formulation used in the construction of lightweight aircraft engine fan blades. U.S. Patent 6,287,080.

Graham, W.R., Hall, C.A. and Morales, M.V., 2014. The potential of future aircraft technology for noise and pollutant emissions reduction. Transport Policy, 34, pp.36-51.

Green, S.D., Fernie, S. and Weller, S., 2005. Making sense of supply chain management: a comparative study of aerospace and construction. Construction Management and Economics, 23(6), pp.579-593.

Koster, J.N., Gibson, C., Soin, G., Willits, W. and Sankaranarayanan, V., 2013. The Hyperion 2.1 Green Aircraft Project. AIAA, 817, p.2013.

Levenko, A.S., Kukushkin, V.I. and Konashkov, A.I., 2013. Modernization of the Propulsion System Scheme of the Craft X-15 with Liquid Propellant Jet Engine for the Airspace Plane. Frontiers in Aerospace Engineering, 2(4).

Lin, Z.M., 2013. Making aviation green. Advances in Manufacturing, 1(1), pp.42-49.

Lu, B. (2010). The Boeing 787 Dreamliner – Designing an Aircraft for the Future. [online] Jyi.org. Available at: http://www.jyi.org/issue/the-boeing-787-dreamliner-designing-an-aircraft-for-the-future/ [Accessed 13 Jun. 2016].

Marsh, G., 2015. Composites in commercial jets. Reinforced Plastics, 59(4), pp.190-193.

Pereira, J.M., Emmerling, W., Seng, S., Frankenberger, C., Ruggeri, C.R., Revilock, D.M. and Carney, K.S., 2015. Analysis and Testing of a Composite Fuselage Shield for Open Rotor Engine Blade-Out Protection.

Pike, J. (2016). The Impact Of Accounting Standards On Spiralling Aircraft ProductionIndirect Costs. [online] Globalsecurity.org. Available at: http://www.globalsecurity.org/military/library/report/1985/KGV.htm [Accessed 13 Jun. 2016].

Post, D.E., Atwood, C.A., Newmeyer, K.P., Meakin, R.L., Hurwitz, M.M., Dey, S., D'Angelo, J.N., Vogelsong, R.L., Hariharan, N. and Kendall, R.P., 2015. The CREATE Program Software Applications for the Design and Analysis of Air Vehicles, Naval Vessels, Radio Frequency Antennas, and Ground Vehicles. DEFENSE HIGH PERFORMANCE COMPUTING MODERNIZATION PROGRAM OFFICE LORTON VA.

Ramesh K. Agarwal (2012). Review of the Technologies to Achieve Sustainable (Green) Aviation , Recent Advances in Aircraft Technology, Ed. R. K. Argarwal, ISBN: 978-953-51-0150 Publ. InTech.

Sadraey, M.H., 2012. Aircraft Design: A Systems Engineering Approach. John Wiley & Sons.

Soc.iastate.edu. (2016). Technical Risk Assessment. [online] Available at: http://www.soc.iastate.edu/sapp/soc415Technical.html [Accessed 13 Jun. 2016

Stewart, M.G. and Mueller, J., 2013. Terrorism risks and cost‐benefit analysis of aviation security. Risk Analysis, 33(5), pp.893-908.

Teoh, L.E. and Khoo, H.L., 2016. Green air transport system: An overview of issues, strategies and challenges. KSCE Journal of Civil Engineering, 20(3), pp.1040-1052.

Tsai, W.H., Chang, Y.C., Lin, S.J., Chen, H.C. and Chu, P.Y., 2014. A green approach to the weight reduction of aircraft cabins. Journal of Air Transport Management, 40, pp.65-77.

Vieira, D.R. and Bravo, A., 2016. Life cycle carbon emissions assessment using an eco-demonstrator aircraft: the case of an ecological wing design. Journal of Cleaner Production, 124, pp.246-257.

Download full paperFile format: .doc, available for editing
Contact Us