StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Elastic/Plastic Tensile Properties Materials - Lab Report Example

Cite this document
Summary
Some of the fundamental aspects of materials are expounded by determining its properties when subjected to various forces such as strain and stress. The properties of these materials are obtained by…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER98.9% of users find it useful
Elastic/Plastic Tensile Properties Materials
Read Text Preview

Extract of sample "Elastic/Plastic Tensile Properties Materials"

Download file to see previous pages

Primarily, the plotted curves will help to understand the stress-strain of the material in respect to yield and fracture aspects. Finally, fracture stress, ultimate tensile strength, ductility as well as work to fracture of the material will be obtained hence helping to draw conclusion based on the relationship developed between the Vickers hardness and yield strength. Resultantly, the information will help in evaluation of the fracture process. Contextually, engineering materials are technically defined based on plastic and tensile properties.

These properties are unique and distinctive in every mechanical material hence used to specify its properties. Ideally, determination of any material involves a lab test process to specifically measure and identify the properties that defines them. Profoundly, the experiment involves a lab test to enable better understanding of various materials based on their elastic properties. Evidently, properties of mechanical materials are identified by considering a number of fundamental aspects such as the Young’s modulus, elasticity, strain and the stress applied on the material.

Ostensibly, the young modulus refers to a measure of toughness in plastic materials. It is used to determine elasticity of various materials such as wires whena force is exerted on it. Young’s modulus is defined by the following formula; Tensile modulus is normally a ratio of stress of force exerted per unit area to the strain force along a given axis. It is used to obtain the elongation or compression present in a material if and only if the magnitude of the stress is lower in comparison to the yield strength of the object when at rest.

Conclusively, the yield strength property is used to define allmechanical materials. Yield strength refers to the amount of stress needed for an object to transform from elastic state deformation to plastic state deformation. Definitely, ultimate tensile

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Elastic/Plastic Tensile Properties Materials Lab Report”, n.d.)
Elastic/Plastic Tensile Properties Materials Lab Report. Retrieved from https://studentshare.org/engineering-and-construction/1668040-elasticplastic-tensile-properties-materials
(Elastic/Plastic Tensile Properties Materials Lab Report)
Elastic/Plastic Tensile Properties Materials Lab Report. https://studentshare.org/engineering-and-construction/1668040-elasticplastic-tensile-properties-materials.
“Elastic/Plastic Tensile Properties Materials Lab Report”, n.d. https://studentshare.org/engineering-and-construction/1668040-elasticplastic-tensile-properties-materials.
  • Cited: 0 times

CHECK THESE SAMPLES OF Elastic/Plastic Tensile Properties Materials

Manufacturing Materials and Technologies

Carbon fibre reinforced polymers are several advantages over conventional materials.... Carbon fibres can be used in combination with aluminium, Kevlar, glass fibres and other metals to make the materials durable and attain more density to mass ratio.... None of the materials has the capability to bear such tension as that of carbon fibres according to the density of the fibres.... Carbon fibre reinforced polymers are non corrosive materials....
6 Pages (1500 words) Essay

Tensile testing

To determine the tensile properties of materials by analysing test results.... Firstly specimens of different materials will be used to determine Young's modulus; secondly specimens will be tested to… One of the most common methods of measuring the mechanical properties of a material is through a tensile test.... The test consists of loading a specimen of known dimensions in tension, with the loading force being gradually School of Maritime and Mechanical Engineering Faculty of Engineering and Technology Lab 7 – Tensile Testing Aim The aim of this laboratory is to gain a greater understanding of tensile testing procedures and to undertake a series of tensile tests on a range of materials....
2 Pages (500 words) Lab Report

Plastics Testing and Failure Analysis

The manufacture of plastic products using different processing techniques and materials makes their identification through visual inspection practically impossible.... hellip; The general characteristic test distinguished most of the samples by color given that most of the other properties tested such as transparency was the same in almost all the samples.... Given the considerable differences in plastic properties brought about by such factors as composition, chemical structure, manufacturing conditions, and thermal history, a series of different tests were necessary in order to completely distinguish the samples....
5 Pages (1250 words) Lab Report

Tensile Testing of Ferrous and Non-Ferrous Metals

In measuring the mechanical properties, two methods were used.... The mechanical properties can also be tested at a scale of submission.... This research proposal "tensile Testing of Ferrous and Non-Ferrous Metals" presents the tensile force that is recorded as a function of the increase in gage length.... Engineering stress or nominal stress, s, is defined as S=F/Ao where F-tensile force and Ao-cross section area of the gage section....
6 Pages (1500 words) Research Proposal

Measuring Tensile Properties of Metal Specimens

This work called "Measuring tensile properties of Metal Specimens" describes the strength and several elastic and inelastic properties of metal specimens to compare the recorded values of each property of the materials with the values reported in the literature.... The author outlines the variations in the performance of materials in load.... or the selection of engineering materials, standard tensile testing parameters are useful.... It helps in the choice of the majority of suitable materials for many projects and to develop new techniques to alter the material's properties so that it can be customized and the material can be used for the particular application....
11 Pages (2750 words) Essay

The Behaviour of Metals

tensile properties such as Young's modulus (E), Yield strength, Percentage elongation, Ultimate tensile strength and fracture strength in each test specimen were obtained as an average depending on the date generated using Microsoft-Excel.... These curves reveal many properties of materials like elastic modulus, tensile strength yield strength, and elongation percentage.... The goal of this report “The Behaviour of Metals” is to explain the behavior of varies metals under tensile loading and to determine their properties via stress-strain curve....
6 Pages (1500 words) Assignment

Engineering Materials: Modes of Failure

The author also describes brittle, fatigue, creep fractures, and acoustic emission experiment to detect crack initiation   … The specimen was placed between the jaws of the tensile testing machine.... The specimen was subjected to the tensile load and the extension of the specimen was measured by the use of the extensometer The initial cavities and crack format foreign inclusions as in these regions glide dislocations pile up and give sufficient stress that can form a microcrack....
8 Pages (2000 words) Assignment

Tensile Tests on Metals and Plastics

Brittle materials, like cast iron, are weak in tension tests because of the presence of submicroscopic cracks and faults (Leeming and Harley, 1981).... "tensile Tests on Metals and Plastics" paper contains a discussion of results and comparisons between different metals, a discussion of results and comparison between different polymers, a comparison between metals and plastics, and the functions of a connecting rod.... The constraints that are used to explain the stress-strain curve of metal include the tensile strength, yield strength or yield point, percent elongation, and reduction of area....
6 Pages (1500 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us