StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Nobody downloaded yet

Introduction to Materials, Tribology and Surface Engineering - Assignment Example

Cite this document
Summary
This assignment "Introduction to Materials, Tribology and Surface Engineering" presents steel as the most widely recycled material. It is an advantage to recycle steel economically and that has been the reason why it has been continued for more than 150 years…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER97% of users find it useful

Extract of sample "Introduction to Materials, Tribology and Surface Engineering"

Download file to see previous pages

Copper has Young’s modulus of 140GPa and a Poisson’s ratio of 0.3. Calculate the effective modulus at the interface when two copper plates are loaded together.Copper has a modulus of 140 GPa and a hardness of 700 MPa. Estimate the elastic strain in copper at the yield stress.The aim of the experiment is to find out the relationship between length wire and force, whether the extension of wire will affect the force or not. The experiment is to find out the elasticity of the copper. The stress and strain will be found out and after that, the young modulus of the material of the copper wire will be found outHypothesis:The wire will be stretched when pulled by the force of the weight and flexibility of the material.

The more flexible the material is the more chance of the material being stretched. The copper wire will have a young’s modulus of 130 Gpa and the secondary source has this worked out. The stretching force which extends the material by equal steps is called Hooke’s law.Ferrous alloys are usually consumed in large quantities due to the wide range of mechanical properties that can be fabricated with ease and it is economical to produce.However, they possess some distinct limitations, chieflya relatively high density; therefore heavier in weight,a comparatively low electrical conductivity, andan inherent susceptibility to corrosion in some common environments.

It is an advantage to use non-ferrous alloys that are having more suitable property combinations for many applications. The distinction is made as cast and wrought alloys in non-ferrous alloys. Cast alloys are alloys that are brittle and formed by deformation that is not possible ordinarily. Wrought Alloys are agreeable to mechanical deformation. The alloy systems heat treatability is mentioned.Heat-treatable designates an alloy whose mechanical strength is improved by precipitation hardening etc.

Non-ferrous metals/alloys are not iron-based.The more common non-ferrous materials are the following metallic elements and their alloys:1. Copper 2. Aluminum3. Magnesium4. Lead5. Nickel6. Tin7. Zinc8. Cobalt etc.COPPERThe main grades of raw copper used for cast copper base alloysare:(a) High conductivity copper (electrolytic) having not less than 99.9% Cu. The content of the oxygen may be of order .40%, Pb and Fe less than 0.005% each. Ag 0.002% and Bi less than 0.001%. Electrolytic copper is used for electrical purposes.

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Introduction to Materials, Tribology and Surface Engineering Assignment, n.d.)
Introduction to Materials, Tribology and Surface Engineering Assignment. https://studentshare.org/engineering-and-construction/2048109-introduction-to-materials-tribology-and-surface-engineering
(Introduction to Materials, Tribology and Surface Engineering Assignment)
Introduction to Materials, Tribology and Surface Engineering Assignment. https://studentshare.org/engineering-and-construction/2048109-introduction-to-materials-tribology-and-surface-engineering.
“Introduction to Materials, Tribology and Surface Engineering Assignment”. https://studentshare.org/engineering-and-construction/2048109-introduction-to-materials-tribology-and-surface-engineering.
  • Cited: 0 times

CHECK THESE SAMPLES OF Introduction to Materials, Tribology and Surface Engineering

The most common methods to measure how easily a surface (e.g. of a biomaterial) can slide on another surface

Tribology: friction and wear of engineering materials: Edward Arnold,(Fax:+ 44 (0) 732 461321) 1992, 352pp, ?... hese are the properties of a surface that can determine the wear and tear of a tissue.... Review the most common methods to measure how easily a surface (e.... of a biomaterial) can slide on another surface.... These are the properties of a surface that can determine the wear and tear of a tissue.... Review the most common methods to measure how easily a surface (e....
2 Pages (500 words) Assignment

Physical Mettalurgy of engineering materials

Radiation heat transfer is the heating process by which heat is emitted from a higher temperature surface into space, then absorbed by a lower temperature surface thru the radiation of heat waves.... Nornalizing is an annealing process by which a metal is cooled in air after heating....
5 Pages (1250 words) Essay

Engineering Materals

As in all types of corrosion, an anodic reaction: exists which propagates over the entire surface.... This is schematically represented in the figure shown: Pitting corrosion is a form of localized corrosion as it does not spread laterally across an exposed surface rapidly but penetrates into the metal very quickly, usually at an angle of 90o to the surface.... The effect of pitting is to cause holes on the metal surface which can corrode a large amount of material from the surface....
4 Pages (1000 words) Essay

Introduction To Surface Tension

the paper "introduction to Surface Tension" describes surface tension is defined as that force which acts perpendicular to a fluid surface.... Experimentally surface tension can be demonstrated by placing an insect in water, the insect is observed to float on water.... hellip; The floating effects observed on the water surface originated from the attractive intermolecular forces....
4 Pages (1000 words) Essay

Engineering material

This graph is converted into an engineering stress versus engineering strain graph, which is later used to calculate material properties such as yield strength, Young's modulus, ultimate tensile strength, resilience, and toughness of material.... Deformation and failure of a structure under a load are resisted by the tensile properties of the material....
6 Pages (1500 words) Essay

Materials and Process: Welding

"materials and Process: Welding" paper examines defects and failures that are observed in mechanical systems and components as a result of excessive wear or loading of the component.... In such cases, corrosion directly attacks the boundaries of the crystallites within the crystalline materials....
7 Pages (1750 words) Coursework

Materials, Tribotechnology, and Surface Engineering

…  The paper "Materials, Tribotechnology, and surface engineering" is a wonderful example of an assignment on design and technology.... nbsp;Thus, the effective modulus is given by the formula: Where; Effective modulus, Elastic modulus, and Poisson's ratio Elastic modulus, Shear modulus, 97GPa  The paper "Materials, Tribotechnology, and surface engineering" is a wonderful example of an assignment on design and technology....
6 Pages (1500 words) Assignment

Materials and Manufacturing - Surface Roughness in Turning

It is evidently clear from the discussion "Materials and Manufacturing - surface Roughness in Turning" that surface roughness is one of the key components considered in the manufacturing industry.... In simple terms, surface roughness can be referred to as surface texture.... It is therefore important to note that, the larger the deviations, the rougher the surface and vice versa.... When the surface is rough, high friction is experienced which results to faster wear to the surfaces....
6 Pages (1500 words) Research Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us